From £49.95 |
Buy it Now For part numbers ending with suffix: /SSCompatible with PIC® 16C62(AB), 16C63(A), 16C72(A), 16C73(AB), 16C745, 16C773, 16F72, 16F73, 16F76, 16F870, 16F872, 16F873A, 16F876A. |
i possibly could be enough but you never reevaluate it until the whole timing mess has long completed
richard Today, 10:49you have set timer1 to overflow every 16.38 mS , you never count the overflows
also adding 65535 to a word var seems very odd do you actually intend to subtract 1
i can't see how any of this...
No it just sets it to use external clock
9651
Thanks for reply !
T1CON = %00000110 ; this command does not start timer1?
Or do I have to use the command: T1CON.0 = 1 'start Timer1 ?
How to see if button is released ? IF DataW.... it's...
in order to measure a buttons hold time you need to either note time button was pressed then the time button was released
the duration is release time - when pressed time, or when button is...
Howdy ! I'm back on the forum after some absence (I had some personal problems).
I am trying to develop a project. I use a PIC12F675 with which I read the value of a group of 6 resistors, of...
What I read from that thread is that you do not have to worry about stealing your idea from pcb perspective.
And I never cared about that. Maybe because I use most of the cases, MCU on board and...
Yup. I googled "jlcpcb steals design" to see if there's a history of incidents, and fell on this thread right away:
...
Exactly. It's really fast to print an empty shell, but don't sneeze on it. :D
The hard part is finding that right balance. I don't have stress testing equipment, so I have to use my better...
From £49.95 |
Buy it Now For part numbers ending with suffix: /SSCompatible with PIC® 16C62(AB), 16C63(A), 16C72(A), 16C73(AB), 16C745, 16C773, 16F72, 16F73, 16F76, 16F870, 16F872, 16F873A, 16F876A. |
Re: How to measure how long I pressed a button ?
Gemini code !
fratello Today, 11:25