From £79.95 |
Buy it Now For part numbers ending with suffix: /PT Compatible with the following microcontrollers: PIC18C801, 18C858, 18F8310, 18F8390, 18F8410, 18F8490, 18F8520, 18F8525, 18F8585, 18F8620, 18F8621, 18F8627, 18F8680, 18F8720, 18F8722 |
Yes, I'm aware you declare it, but you don't assign anything to it. It's there as a newly declared variable with the contents of null. So, I'm guessing serin is waiting for a null character to arrive...
rocket_troy Today, 02:07Hi Troy,
I understand what you're saying. But I do declare ProdIDRx as a Byte variable in the beginning of the program as "ProgIDRx VAR BYTE".
What am I missing here?
Well, that's what I'm confused about. Don't you need to actually nominate something as the qualifier rather than an empty variable?
p207 of the manual:
"list of data items to be received may be...
This is a photo of the packet (8N1) generated by my PIC transmitter and that for some reason is not being received by my PIC receiver port GPIO.5. It's a two byte transmission $A and $61. Its in...
JESmitter Today, 01:41looks right now, ...... first post was unsure for OSCCON..... no wait !!!!! check for ... $01100001, bit 0, system clock ,,, but looks like you had it right UNLESS the configuration setting didn't...
amgen Today, 01:40Hi Amgen,
I don't recall why I included a PPL in my oscillator comment but, I believe that I have my OSCON statement correct for an internal 4 MHz cock. Right?
OSCCON = %01100000 ' Set system...
Hi Troy,
Here's my OSCON
OSCCON = %01100000 ' Set system clock 4MHz(1MHz internal w/x4 PLL enabled)
My SERIN SYNTAX
SERIN PrgIn,1,5000,PassProg,[ProgIDRx],IDByteRx ' Check for...
Then, don't you need to nominate the qualifier as being something? like:
Serin PrgIn,1,5000,PassProg,["ABC"],IDByteRx ' Wait for 5 seconds for "ABC" to arrive then put contents in IDByteRx?
Troy
if using 12f683 ..... check your OSCCON ..... no PLL on 12f683 unless there is new 12f....
9659
From £79.95 |
Buy it Now For part numbers ending with suffix: /PT Compatible with the following microcontrollers: PIC18C801, 18C858, 18F8310, 18F8390, 18F8410, 18F8490, 18F8520, 18F8525, 18F8585, 18F8620, 18F8621, 18F8627, 18F8680, 18F8720, 18F8722 |
Re: Serin Not Recognizing Qualifier From Another PIC
works perfectly for me if you don't try to use qualifier before you actually set it to a meaningful value as rocket troy indicated
richard Today, 02:24#CONFIG; set CONFIG1 for internal oscillator, watchdog on,...