PDA

View Full Version : 12F683 Programmer



Red_Stafford
- 2nd October 2008, 12:32
Has anyone here succefully built a programmer to program a 12F683 ?

I was looking at maybe having a go at making the below programmer if it would work on the 12F683.

But I dont really understand Schematic drawings.
Also is there anyone in the UK local to the West Midlands who would be willing to make a programmer up for me, I would gladly pay them for there time and expense.

http://www.olimex.com/dev/pic-pg2c.html

Melanie
- 2nd October 2008, 12:40
You know junk programmers are so cheap, it's not worth anyone actually building a 1-off. Sensibly what is your budget? (and don't say a fiver!). If you did a Google or eBay search, then you'd find them at about £20, which by the time you get a PCB made, add a good quality ZIF socket and decent components, you're at that price already. A kit of parts (if offered by someone like Crownhill - good idea Lester, why not do it) would still be about £20.

Red_Stafford
- 2nd October 2008, 13:58
You know junk programmers are so cheap, it's not worth anyone actually building a 1-off. Sensibly what is your budget? (and don't say a fiver!). If you did a Google or eBay search, then you'd find them at about £20, which by the time you get a PCB made, add a good quality ZIF socket and decent components, you're at that price already. A kit of parts (if offered by someone like Crownhill - good idea Lester, why not do it) would still be about £20.

The trouble with eBay is most of them are from China so the shipping is long and expensive

Melanie
- 2nd October 2008, 14:11
Actually I bought one of those $80 ones from China (same folks also have $40 ones) just to see, a couple of months back... band new, all accessories, and arrived in 7 days. Can't fault it... just need a UK Power Cube as mine had those angled Chinese plugs.

Red_Stafford
- 2nd October 2008, 16:54
See below, would this be all I need to program the 12F683 ?

http://cgi.ebay.co.uk/JDM-40-ZIF-USB-microchip-programmer-Kit-149-PIC-program_W0QQitemZ350102316357QQcmdZViewItem?hash=i tem350102316357&_trkparms=72%3A1301%7C39%3A1%7C66%3A2%7C65%3A12%7C 240%3A1318&_trksid=p3286.c0.m14

Melanie
- 2nd October 2008, 17:37
Well, it's got the PIC you want to use listed, and for the price you really can't go wrong.

skimask
- 2nd October 2008, 17:56
Well, it's got the PIC you want to use listed, and for the price you really can't go wrong.
Is the PICKIT2 that hard to get over there? Is it that much more expensive or something?
I don't see why people are still buying the 'knock-offs' when the PICKIT2 is just plain ol' so much more than meets the eye...

Red_Stafford
- 2nd October 2008, 19:34
Is the PICKIT2 that hard to get over there? Is it that much more expensive or something?
I don't see why people are still buying the 'knock-offs' when the PICKIT2 is just plain ol' so much more than meets the eye...

PICKIT2 is about £30 but then dont you need to buy something else to go with it to program PIC's ?

skimask
- 2nd October 2008, 21:47
PICKIT2 is about £30 but then dont you need to buy something else to go with it to program PIC's ?
Nope...complete kit, USB programmer, CD with software (which you can download from Microchip), basic instruction manual (more like a pamphlet), better manual online and/or on CD.
Get the PICKIT2 Debug Express and you'll get a demo board with a 16F887 on it, along with a few goodies. Costs $50USD, don't know what it'll run you over there.

mackrackit
- 2nd October 2008, 22:44
PICKIT2 is about £30 but then dont you need to buy something else to go with it to program PIC's ?
Dig up a 6 pin header and a breadboard, forget about the ziff, and do ICSP.

When you complete a PCB and want to change code a bit, and you have built a header in, ICSP.

A test rig for 18F6680, a little messy, the PICKIT2 6 pin header is on the right.
<img src="http://www.picbasic.co.uk/forum/attachment.php?attachmentid=2881&stc=1&d=1222979909">