PDA

View Full Version : Quansheng TG-K4AT



iugmoh
- 28th April 2008, 12:00
Hi all, I need your help in this problem
I have a Quansheng TG-K4AT radio device and I want to make a programmin cable so I can programm it using PC , but the problem I don't know where is RX , TX and GND for this device , I search alot for user manuals for this device but I can't find anything , so how I can solve this problem ?

mister_e
- 28th April 2008, 18:15
Probably this is what you need to buy
http://overtime.diytrade.com/sdp/467617/4/pd-2561270/3393047-1349721.html

and then i found
http://pgwec.com/kpg/index.htm

Not sure if it's what you need though :o

iugmoh
- 29th April 2008, 13:01
thanks alot mister_e for your hint and good information
I build the circuit and test it on my device and all thing working properly .

thanks again for mister_e

Mayvena
- 5th August 2009, 15:56
I'm sorry to resurrect such an old thread, but I need to know whether it is possible to program a Quansheng TG-K4AT to have a 6.25 KHz step. I just bought one and noticed that it has 5 KHz and 12.5 KHz steps, but not 6.25
I also need to know what software I can use to program the device.
Thanks in advance.