PDA

View Full Version : initializing command for CGM 064128f



anjaz
- 14th February 2008, 10:41
--------------------------------------------------------------------------------

hi,
AM trying to configure CGM 064128f Graphical lcd i need to get the initializing commands of this LCD(HEX code)

i will b thankful if u culd mail me the details .............
with the purpose of the HEX code u suggested

i have the datasheet with me available but am trying to configure graphical lcd first time so needed only the improtant commands the HEX codes needed to initialize the Graphical LCD .........
it uses KS0713 controller samsung


mail id: [email protected]

skimask
- 14th February 2008, 18:28
i have the datasheet with me available but am trying to configure graphical lcd first time so needed only the improtant commands the HEX codes needed to initialize the Graphical LCD .........
it uses KS0713 controller samsung

That's a fairly standard graphical LCD and a fairly standard graphical LCD controller chip.
While PBP doesn't support it directly, there are numerous places around the web that have either assembly or PicBasicPro-like code that is easily adaptable to PBP...all it takes is a bit of searching.
If you've got the datasheet, it's relatively easy to create your own, not impossible by any stretch.