PDA

View Full Version : Error help



fowardbias
- 13th October 2007, 03:18
I have run into an error code which will not allow me to program anything. Trying to compile previous good programs (either compile or compile and program) brings up this flag. INTERNAL: [402] attempt to pop empty symbol table stack. I have a missed placed post over at the wish list titled 4-line LCD and 18F4620 which is where all this began.

fowardbias
- 13th October 2007, 04:04
For those few that run into the 400 series errors I found a previous post with a similiar problem. All the info about code errors is in the text manual for the PM assembler (on the disk). Seems this is a heavy one that the developers will help with if given the code with which it occured. I'll contact MeLabs for help. Rebooting was no help.