PDA

View Full Version : multipal serial ports



Andre_Pretorius
- 12th August 2007, 17:27
Hi there
I need to build a series comms repeater. I require 2 and in future maybe a third port, my problem is that I need to use even parity and serin does not support it. I could be fine with a chip that has 2 uarts in but what if I need a third

Any suggestions

Darrel Taylor
- 12th August 2007, 19:15
SERIN2 can use even parity.

But since it can't transmit at the same time it's receiving,
it'll be a whole lot easier with USART's

90alper90
- 11th September 2007, 15:53
İf you want to communicate many chip.You will use RS485 protocol.But when device send data dont able to recive data at same time.

http://www.denizelektronik.com/rs485.htm

RS232-RS485 converter