PDA

View Full Version : 18f242 serin2 timeout



Armadus
- 28th July 2007, 21:46
Using PBP 2.45, Microcode Sudio, and 18f242-I/sp at 20mhz I have not been able to get the program to move to a label after time out. The program appears to get to the Serin2 command and stop at the Wait command. Any suggestions?
Thanks

Bruce
- 28th July 2007, 23:41
The timeout/label option is useless if you have noise on the serial input
pin.

Even a quick blip on this pin will cause the timeout to reset.