PDA

View Full Version : What do i send



ZeroFusion
- 8th November 2006, 12:05
hey,
I need to programme my flash pic from my pc, its connected directly through serial. what commands cxan i use either in c or in visual basic?

thanks

sayzer
- 8th November 2006, 12:39
What do you mean by "I need to programme my flash pic from my pc" ?

You want to insert your HEX file into the PIC or you will do something else?


-------------------------

mister_e
- 8th November 2006, 21:17
You have to use a device-programmer in-between.

There's tons of model, depending your budget, it goes from 2$ to 1000$

A nice starter kit is probably the Microchip PICkit 2. 'round 50$ and comes with a little development board.

ZeroFusion
- 13th November 2006, 19:39
What do you mean by "I need to programme my flash pic from my pc" ?

You want to insert your HEX file into the PIC or you will do something else?


-------------------------

The plan is to insert the hex into the pic! lol can you tell i'm new at this! :-)

mister_e
- 13th November 2006, 19:57
http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=81
http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en023805
www.ic-prog.com
www.winpicprog.co.uk
http://www.lancos.com/prog.html
http://www.bkprecision.com/www/np_searchmodel7.asp?lf=EPROM+Programmers
http://www.elnec.com/programmers.php
http://www.elnec.com/pikprogplus.php
http://www.electronicaestudio.com/en/basicos.htm
http://www.google.ca/search?hl=en&sa=X&oi=spell&resnum=0&ct=result&cd=1&q=vb6+pic+programmer&spell=1