PDA

View Full Version : microcode studio


cable tech
- 9th July 2006, 17:56
how do we add to the targeted pic selection, i'm programming a 16f690 but no target device is in the pulldown menu for it?
john
mister_e
- 9th July 2006, 19:33
it's suppose to be done automatically ... well in MCSP.
Case you want to add a device, open the PIC.INI file and add it in
flotulopex
- 14th September 2011, 11:18
How do I add a new device in MCS v4.0.0.0 please?

I'd like to use PIC18F26K80 but it is not in its device (drop-down)list.

I can't find in my computer any of PIC.INI or DEVICE.ini files described in other threads or founds on the web, adding *.BAS or *.INC files in PBP doesn't seem to work either :(
Bruce
- 14th September 2011, 20:56
Support for the PIC18F26K80 was added in PBP version 2.60C, and MCS should pick up on this if you have a version of PBP that supports the PIC18F26K80.
flotulopex
- 14th September 2011, 22:20
I may need to upgrade my PBP.

Thanks for the info.
Demon
- 15th September 2011, 18:24
If you have the free version of MicroCode Studio, it supports 16F877A, 18F25K20, 16F887, 18F452, 18F4520 PICs.

(I just happened to research this in the chat just now)

Robert
surfies
- 18th September 2011, 09:14
How do you make Microcode studio work in Win 7 with a 64 bit system? My MCS does not want to compile, just give me nasty message.
mackrackit
- 18th September 2011, 09:51
What is the message? What is the version?
You should not have a problem.
mister_e
- 18th September 2011, 13:03
From the ChatBox





I have problems with Micro code Studio it does not want to compile. I upgraded my computer to Win 7. so there is a fault message "incompatability with windows 64 bit".



Compile with MPASM instead of PM.
flotulopex
- 21st September 2011, 06:44
I'd like to use PIC18F26K80...
I just learned from MICROCHIP that this PIC is not supported by my PICKit2 programmer which, btw, is already considered as obsolete = no update in sight.

New PBP + new programmer = pfffff......what's next? :(
Ioannis
- 21st September 2011, 08:04
Maybe another new PBP for 24F series and a new pogrammer again???

In that case I sure am gonna update :)

Ioannis
surfies
- 28th September 2011, 16:53
What is the message? What is the version?
You should not have a problem.

Thanks for the reply but I manage to fix the problem, re install Win7 with x86 (32 bit).



Windows; the best virus ever written.