View Full Version : pic16c54a
mavi
- 5th February 2006, 18:13
plz help my pic16c54a programmer shematic tankyou
Kamikaze47
- 19th February 2006, 13:44
This programmer; http://www.olimex.com/dev/pic-pg2c.html, and this software; http://www.ic-prog.com/ should do the trick.
elektroline
- 20th February 2006, 18:58
En iyisi Konya sokaktan bir programlayıcı al.. 45 YTL
ben ööle yaptım... :)
NavMicroSystems
- 22nd February 2006, 23:41
En iyisi Konya sokaktan bir programlayıcı al.. 45 YTL
ben ööle yaptım... :)
what is elektroline trying to tell us?
mavi
- 23rd February 2006, 10:34
[QUOTE=elektroline]En iyisi Konya sokaktan bir programlayıcı al.. 45 YTL
ama bu yer turkinenin neresinde ve bunun semasi yokmu tesekkurler
mavi
- 23rd February 2006, 10:37
This programmer; http://www.olimex.com/dev/pic-pg2c.html, and this software; http://www.ic-prog.com/ should do the trick.
tankyou frend but this programmer pic16c54 not supported plz pic 16c54 supported programmer
elektroline
- 23rd February 2006, 19:06
Hi mavi,
Konya sokak in Ankara in Turkey.
turkish (bana mail atarsan sana hem şema hemde kimlerden nasıl satın alabileceğini yazarım. )
Selamlar.
Best regards...
Elektroline
www.labarna.com
[email protected]
mavi
- 24th February 2006, 18:37
ustam eger hotmail adresin varsa bana ver daha cabuk ulasıirim sana cekiniyorsan ozel mesaj at tesekkurler..... elektroline
mavi
- 8th March 2006, 12:10
lady is centirmen help my i 3 moon search pic16c54 prokrammer bat not found is site no help somebody
electoline! arkadasim verdigin adrese baktım sorusturdum benim istedigim entegreyi programlayamıyor tekrar yardimin icin tesekkurler
Melanie
- 8th March 2006, 12:39
http://www.elnec.com/index.php
Their programmers support 16C54... check this list...
example 1. manufacturers list...
http://www.elnec.com/manuf_list.php?src=sw%2Fjetpdev.htm&pgm=anyProg&prg_link=jetprog.php
example 2. microchip list...
http://www.elnec.com/dev_list.php?pgm=anyProg&prg_link=jetprog.php&mnf_src=sw%2Fjetpdev.htm&src=sw%2Fdev_html%2Fjetpdev%2Fmicrochip_dev.htm
You get what you pay for...
If you are in Turkey...
Infogate - Era Bilgi Sistemleri Yayincilik Elektronik San. ve Tic.ltd
Mr. Gokhan Dincer
Soyak Baglarbasi Evleri, B-3 blok D:3
Baglarbasi, Uskudar, Istanbul 34664
Tel: +(90) (216) 5300571 - 5300572 - 5300 573, Fax: +(90) (216) 5300 574
E-mail: Infogate - Era Bilgi Sistemleri Yayincilik Elektronik San. ve Tic.ltd
Web page: www.infogate.org
mavi
- 8th March 2006, 14:40
for help tanks MELANİE bat is mashine 800euro and no support adapter
im search easy programmer+ shema again tanks
Melanie
- 8th March 2006, 16:45
You never specified a budget... just said you needed a programmer for a particular device. I don't know what kind of adaptor you seek, but elnec pretty much manufacture every possible adaptor for almost any programming device in existance.
The problem with going 'cheap' is you end up wasting so much time that you might as well have bought something better to start with.
mavi
- 9th March 2006, 06:54
hi MELANİE plz see here
http://rapidshare.de/files/15052806/pic16c54.rar.html
Melanie
- 9th March 2006, 08:08
The third design (for 18-pin PIC) will match your requirements exactly and be the simplest to construct. You will also be able to use it for similar 18-pin PIC devices like 16F84 and 16F628.
mavi
- 9th March 2006, 09:05
yes i splitted it but i notfound programmer
ic prog no supported
ponyprog no supported
which one do i use programmer?
for help tanks
Melanie
- 9th March 2006, 11:42
I'm sorry, I can't help you with cheap or home-build programmers or software to drive them.
mavi
- 9th March 2006, 18:10
EVERYTHING, FOR, THANKS frends
Powered by vBulletin® Version 4.1.7 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.