PDA

View Full Version : multiple serial inputs



Richardco
- 24th November 2005, 12:56
Hi All, Well i was hoping that when someone looks at the diagram i have provided they will say " oh yeh i know how to do that here is the code" However being a realist as well i dont suppose that will happen so, would anyone have any example code that i would be able to modify or look at to help me get where i want to go as indicated in the diagramm....Please.
http://www.picbasic.co.uk/forum/attachment.php?attachmentid=633&d=1132833098

NavMicroSystems
- 25th November 2005, 20:42
Richardco,

if you had provided a bit more details on the other thread you definitly had got a more qualified answer.

The "NMEA-Multiplexer" issue has already been discussed on this forum.
Please use the "Search"

As there is no defined timing between the different talkers I would prefer to have one (small) PIC per Talker to listen to the NMEA sentences and one "MASTER" PIC to combine the different sentences oito one telegram.

That way you don't miss any sentence from any talker, and you can easily convert sentences before you send out the combined telegram to the bus.

Richardco
- 25th November 2005, 22:26
Ok ive put this post in the wrong place so to save posting it again here is where this thread continues http://www.picbasic.co.uk/forum/showthread.php?t=2827
sorry