Bluesmoke
- 15th April 2005, 00:19
I plan on building the JDM Pic-Programmer 2 but I only have a 9-pin serial port. Am I correct in assuming that I can just wire it like there's a null modem in between?
So:
TxD (Pin 2) goes to Pin (3)
GND (Pin 7) goes to (5)
CTS (Pin 5) goes to (8)
DTR (Pin 20) goes to (4)
RTS (Pin 4) goes to (7)
Diagram: http://www.jdm.homepage.dk/newpics.htm
I plan on using IC Prog to program a 16F88. Anybody else try this?
So:
TxD (Pin 2) goes to Pin (3)
GND (Pin 7) goes to (5)
CTS (Pin 5) goes to (8)
DTR (Pin 20) goes to (4)
RTS (Pin 4) goes to (7)
Diagram: http://www.jdm.homepage.dk/newpics.htm
I plan on using IC Prog to program a 16F88. Anybody else try this?