www.circuit-mart.com-Quality PCB Fabricator from China

[CircuitMart]

Hello Friends,

Perhaps you are worrying about where to make cheap and good quality PCBs,
I take this chance to introduce us to you, we hope we could be one of your
choices. Pls kindly advise that you know us from this post, I would very much like
to give you 10% discount for sincerity purpose.

CircuitMart is a professional Printed Circuit Board supplier in China. We
have been serving customers from nearly 30 countries with PCB/FPC and
other related products for 6 years, and will continue to provide the best
products and service to our customers.

Exactly, PCB is our major business. We supply all kinds of boards, from
1-48 layers, Flex, Flex-rigid and have a wide network
of producers which support almost all kinds of base materials and
substrates. We are especially good at quick turnaround jobs.
Normally, we can finish the PCBs within 3 working days for a 6 layers
board or below; and 5 working days for 8-12 layers board.
We have been continuously seeking for the best production partners for our
customers. For 2 layer pcb with normal size, the cost is
only USD49 for 10pcs prototyping. For large mass production of them, we
can achieve the lowest cost to USD69 per m2. If you are
interested, Pls do have a try with us.

CircuitMart is our company, however it is a hand of customers extending to
the best outsourcing choice in China. We are very proud
to be your reliable and cost-effective choice.

Contact me for more details.

With Best Regards!

Iris Cao
CMPCB Inc.
www.circuit-mart.com
Tel: 0086 20 3470 4123
Email : [email protected]
MSN ONLINE: [email protected]
skype:irisccy
Facebook : Michael Mai
Twitter: mw424

[dhouston]

Your prices look good. Do you do assembly?

[dhouston]

Another question...

Your webpage indicates you need a README file with the Gerbers, explaining the layer names, etc. Can this be a text file (e.g. created with Notepad)? Some of your competitors in China need this to be a PDF or Excel file in order to read it with any formatting (e.g. tabs).

[Demon]

Interesting.

What would be considered as "normal size"?

Also, how much would shipping and handling be for 10pcs double-layer to Montreal, Quebec, Canada?

[CircuitMart]

Your prices look good. Do you do assembly?

we do assembly jobs, also buy parts, but PCB is main business.... we are doing assembly this week for clients from South America for 3 years... 700 pcs annualy...
I don't know whether this meets your demands..

[CircuitMart]

Another question...

Your webpage indicates you need a README file with the Gerbers, explaining the layer names, etc. Can this be a text file (e.g. created with Notepad)? Some of your competitors in China need this to be a PDF or Excel file in order to read it with any formatting (e.g. tabs).

Hello Friend,

Txt file is enough. you could zip it into gerber data for our checking purpose, you could also specify in the email. The key is make your spec clear enough. Normally for first order, we will talk with you the default spec is Lead free HAL, ROHS, Green solder mask with White silkscreen....

Rgds,

Iris

[CircuitMart]

Interesting.

What would be considered as "normal size"?

Also, how much would shipping and handling be for 10pcs double-layer to Montreal, Quebec, Canada?

Board size less than 100mmx100mm, namely 3.937"x3.937"
10pcs double-layer of 10x10cm to Montreal, Quebec, Canada,

Shipping and Handling charge USD 30 using DHL or UPS.

RGDS,

Iris

[Demon]

.. For large mass production of them, we
can achieve the lowest cost to USD69 per m2. ...


I forgot to ask what is the MOQ for "large mass production"?

[dhouston]

The prices look very good - if my conversions of in² to cm² & m² are correct.:confused:

It would be much easier to make comparisons if the prices were quoted per board rather than per cm².:)

See PCBCart.com (http://pcbcart.com) and ezPCB.com (http://ezPCB.com) for examples.

[dhouston]

I have received email quotes for three boards...


0.6"x1.6"
0.75"x0.75"
4.250"x3.000"

The two small boards will each cost $49 for 10 pcs; the larger board exceeds their limits (800cm²) and 10 pcs will cost $63 for a total of $136 + $30 estimated shipping to the USA.

For 100 pcs, costs are $35, $49, and $156 with shipping estimated at $60.

The boards all meet their standard specifications. They include a discount for the forum. The prices are very attractive. I plan to order & test the 10pc prototypes and will order 100 of each if all is OK. I'll try to remember to post here about the quality of the prototypes.:cool:

[CircuitMart]

I forgot to ask what is the MOQ for "large mass production"?

Hello Friend,


For 2 layer, MOQ size is roughly more than 2 m2
For 4 layer, MOQ size is roughly more than 3 m2
But it is flexible, depending on exchange rate, price change
of raw material, and production capacity of the fab house at
the ordering time....

So, when your initial design is mature and has its market, feel
free to contact us, we also do assembly here in China.

My principle is to grow up with every client, and at the same time
to earn a margin to make a living.

Best Regards,

Iris

[CircuitMart]

The prices look very good - if my conversions of in² to cm² & m² are correct.:confused:

It would be much easier to make comparisons if the prices were quoted per board rather than per cm².:)

See PCBCart.com (http://pcbcart.com) and ezPCB.com (http://ezPCB.com) for examples.

One of these two examples you refer to me, I must confess I worked there for a short while in the year 2006, boss is very kind person. I hope his business could become better and better...

I will modify the quotation page to include English unit, thank you very much for your suggestion.


Best Regards,

Iris

[dhouston]

I have received email quotes for three boards...


0.6"x1.6"
0.75"x0.75"
4.250"x3.000"

I ordered these on 12 May. Last Friday (19 May) they emailed that they had shipped the previous day but were held up in customs and, if they could not resolve the issue, would have to remake the boards.

They arrived today so I assume they resolved the customs issue (and learned how to avoid future issues).

The quality looks very good so I have no hesitation in recommending them.

EDIT: One caveat: They cut all of the boards apart. I would normally expect the smaller boards to be panelized and v-grooved but I did not specify that. Anyway, it might require that they take up a full panel for it to be done that way.

[CircuitMart]

Thank you for your recommendation.

;) So glad. next time pls specify to panelize smaller boards...

and I will discuss this point with you before fabrication.


Cheers,

Iris

[KVLV]

Hi Iris,
I am planning to make a pcb in 10x15 inch panel including 3 or 4 designs.
I wonder how do I specify where to make a v-score in Altium design (10)?

[Bruce]

EDIT: One caveat: They cut all of the boards apart. I would normally expect the smaller boards to be panelized and v-grooved but I did not specify that. Anyway, it might require that they take up a full panel for it to be done that way.
Did you submit panelized Gerbers, with instructions for scoring, and they cut them all apart, or did you just send them a few single board files with a request for multiple boards per file?

Just curious. I was considering trying them, but we need scored panels.

[dhouston]

Did you submit panelized Gerbers, with instructions for scoring, and they cut them all apart, or did you just send them a few single board files with a request for multiple boards per file?

Just curious. I was considering trying them, but we need scored panels.Bruce,

I just submitted singles. The fault was mine. I was accustomed to automatically getting scored panels for small parts from other suppliers (whom I've posted about here) BUT those were for larger quantities which filled a panel (or more). And, as CircuitMart (http://www.circuit-mart.com/)noted, they will do this on request.

I would have no hesitation ordering from them (http://www.circuit-mart.com/)or from ezPCB (http://www.ezpcb.com/ezpcbweb3/index.php). I will likely use one or the other depending on the details.

One of the boards CircuitMart made for me had 24 very closely spaced (30 mil diameter, 50 mil centers) unplated holes. One of my other preferred suppliers was afraid of it which was what led me to try CircuitMart who handled them perfectly.

[GoldenCircuits]

Hi

Do you have any requirement of PCBs, please send email to me by [email protected]. We are located in shenzhen of China.
We can provide you good PCBs with competitive price.
Alex
www.goldencircuits.com

[GoldenCircuits]

Hi Robert

How are you? I am Alex works at GoldenCircuits company. We are professional PCB manufacturer from China. Please send email to me by [email protected] for quotation.

Thanks.
Alex
www.goldencircuits.com

[CircuitMart]

LONG TIME NO SEE!
When I visited here today afternoon,
I saw many active IDs, friends, competitors, new faces....

The only thing not chaned is that I am continuing my
good go with www.circuit-mart.com...

As mentioned always, I have been working my best to make CircuitMart
a bridge to China economical and reliable PCB related products
for clients....

And I sincerely hope through CircuitMart to know more and
more interesting and diligent people in this global village...

Thank you for long time surpport to CircuitMart,
We do better and better with every and each important client
to grow and improve together!

For inquiries, pls write to [email protected]
for online talk, pls add msn:[email protected] to your list.

Cheers!

Iris

[CircuitMart]

Pls kindly be advised of our sales plan for PCB in Q4 2012:

PCB prototyping service:

$49 to East Asia and $59 to other countries for 2 layer PCB;

$149 to all countries for 4 layer PCB.

Shipping cost included, by DHL or EMS(Aramex for Middle East).

Time:From Autumn 15th. to X’mas.

Remarks: FR4, board thickness below 1.8mm; 1OZ copper thickness, HASL.
Provides 10pcs for size below 5*5cm; 5pcs for size below 10*10mm.

Interested parties kindly send mail to [email protected]
to have a try.

Cheers!

Michael